Installation

Mounting the Lens

Chapter

Only 1/2-inch bayonet-mount lenses can be attached to the camera.

For 2/3-inch lenses, an LO-32BMT lens mount adaptor (not supplied) is required.

1 Turn the mount lever counterclockwise as far as it goes. (If the lens mount cap is in place, remove it.)

Mount lever

2 Align the positioning pin on the lens with the matching hole in the lens amount and attach the lens.

Align the pin with the hole.

3 Turn the mount lever clockwise as far as it goes to lock the lens in the lens mount.

Mount lever

4 If the lens is a 2/3-inch type, connect the lens cable to the camera’s LENS connector.

(This step is not necessary for 1/2-inch lenses.)

to LENS connector of the camera

Connection and Installation 3

Lens cable

39