MODE

Tracking method

Intended use

CHASE 1 The pan/tilt action is

Used to check

 

not performed.

if the subject is

 

(Camera does not

recognized.

 

move.) The frame

 

 

tracks a subject only in

 

 

the range of the screen.

 

 

 

CHASE 2 The frame tracks a

Used to

 

subject while the pan/

perform

 

tilt action is performed.

normal

 

In this mode, the

tracking

 

subject is always

operation.

 

placed in the middle of

 

 

the screen.*

 

 

 

CHASE 3 Uses the same tracking

Used when

 

method as that of

you wish to

 

CHASE 1 except that if

limit the

 

a subject almost goes

camera

 

out of the screen, the

movement as

 

camera performs the

possible, in

 

pan/tilt action so that

such a case

 

the subject is placed in

when you

 

the middle of the

perform the

 

screen.*

image

 

 

transmission.

 

 

 

*The position in which the subject is to be placed can be changed from the middle of the screen. See “Changing the frame position” on page 16.

If the frame is repeatedly extended to the full screen

The camera does not recognize the subject. Press the START/STOP button and go back to the step 2. If doing so does not solve the problem, see “If a subject cannot be recognized or captured” on page 17.

To turn off the setting value and/or frame

If the setting value and/or frame are displayed as you record a picture, those come with the recorded picture.

To turn off the setting value, press the DATA

SCREEN button.

To turn off the frame, press the FRAME DISPLAY button.

Note

Once the setting value is turned off, the setting value is not displayed until the next time you press the DATA SCREEN button. However, the setting value is displayed automatically when the unit enters into the AT setting mode for the first time after the power is turned back on.

To keep the brightness of the subject as is (Auto back lighting function)

After the step 2, press the AE button.

AT MODE

 

P-T DRIVE

SETTING

 

ENTRY1

 

51

 

 

 

 

 

 

AT AE

CHASE 1

To disactivate the function, press that button

again.

Note

Be sure to press the AE button before proceeding with the step 3. This function is not activated after the START/ STOP button is pressed.

To keep the size of the memorized subject as is

After the step 2, press the AUTO ZOOM button. To cancel the function, press that button again.

To cancel the AT function

Press the START/STOP button.

The information of the memorized subject is erased.

To exit from the AT setting mode, press the

AT ON/OFF button.

If the lamp at the side of the lens light up

The camera is not capturing the memorized subject correctly.

Press the arrow button to perform the pan/tilt operation so that the subject comes into the screen. Or have the subject memorized onto the camera again.

Lights up.

continue to next page 15EN

Page 15
Image 15
Sony EVI-D30 If the frame is repeatedly extended to the full screen, To turn off the setting value and/or frame