5 Adjust each parameter.
qWhile holding down the CURSOR button,
press the arrow button ( 
or 
) to select a desired parameter.
wWhile holding down the CURSOR button,
p r e s s t h e a r r o w b u t t o n ( | o r |
) to select a desired value. |
|
Adjust the value of each parameter as specified below, in the order from top to bottom.
| MODE 1 | MODE 2 | MODE 3 |
BRIGHT | 2 | 2 | 2 |
|
|
|
|
HUE | 15 | 15 | 15 |
|
|
|
|
SIZE | 0 | 0 | 0 |
|
|
|
|
REFRESH | 1 | 8 | |
|
|
|
|
DISPLAY | 3 | 0 | 0 |
|
|
|
|
*When the MODE 3 is selected, you cannot change the value of REFRESH since the reference picture is not refreshed in that mode.
6 Press the MENU button to complete the setting.
If the detection operation is not performed properly, see “Adjusting the value of each
parameter.”
Adjusting the value of each parameter
At the step 5 of
Parameter | Content/Tips in setting | Adjustable |
|
| range |
|
|
|
BRIGHT*1 | Sets the sensitivity to a | 0 to14, |
(Sensitivity | change in brightness. The | 15 |
to | lesser the value, the more | (Parameter |
brightness) | sensitively the camera | disabled) |
| detects the change. Adjust |
|
| this value within the range |
|
| in which an error does not |
|
| occur. |
|
|
|
|
HUE*2 | Sets the sensitivity to a | 0 (5°) to |
(Sensitivity | change in color. The lesser | 14 (75°), |
to hue) | the value, the more subtle | 15 |
| change in color the camera | (Parameter |
| detects. Adjust this value | disabled) |
| when the camera hardly |
|
| detects the change with |
|
| only the BRIGHT adjusted, |
|
| in such a case when the |
|
| brightness of a subject to be |
|
| captured is almost |
|
| identical to that of its |
|
| backdrop. |
|
|
|
|
SIZE*3 | Sets the sensitivity to the | 0 (approx. |
(Sensitivity | size of the frame area | 0.3%) to |
to size) | being taken up by a | 15 (approx. |
| changed portion. Adjust | 20%) |
| this value in such a case |
|
| when you wish to have |
|
| the camera detect only a |
|
| greater change. |
|
|
|
|
REFRESH*4 | Sets the period of time for | 0 (0.07 sec.) |
(Reference | which the reference | to 15 |
picture | picture is retained. | (60 min.) |
refreshing |
|
|
timing) |
|
|
|
|
|
DISPLAY | Sets the period of time for | 0 (0.07 sec.) |
(Signal | which the detection signal | to 14 (30 |
output | continues to be generated | min.), 15 |
duration) | once a change has been | (continuous) |
| detected. |
|
|
|
|
*1 After the value of the BRIGHT has been changed, the value of the HUE is automatically set to 15 and the value of the SIZE to 0.
*2 After the value of the HUE has been changed, the value of the BRIGHT is automatically set to 15 and the value of the SIZE to 0.
*3 Be sure to adjust the value of the SIZE after adjusting the values of the BRIGHT and HUE.
•The camera might not be able to detect a change if both the size of the frame and the value of the SIZE are too small.
*4 Can be adjusted only when the camera is in the MODE 1 or MODE 2.
