Customizing Your Monitor
Setting the power saving delay time
You can set the delay time before the monitor enters the power saving mode. See page 19 for more information on this monitor’s power saving capabilities.
Locking the controls
The control lock function disables all of the buttons on the front panel except the u (power) switch and MENU button.
1Press the MENU button.
1 Press the MENU button. | The MENU OSD appears. |
The MENU OSD appears. |
|
| MENU |
MENU |
|
2
2Press the ¬./>and >?//buttons to select
“ 
OPTION,” and press the MENU button again.
The OPTION OSD appears.
OPTION |
|
| ON |
ZZ... | 1 MIN |
| |
| UNLOCK |
MANUAL DEGAUSS | |
| 3 |
3Press the ¬./>buttons to select “ ZZ... (PWR SAVE
DELAY).”
OPTION |
| |
| AUTO |
|
| 5 SEC | 1 MIN |
ZZ... | 60 MIN | OFF |
| ||
| PWR SAVE DELAY | |
|
| 4 |
4Press the >?//buttons to select the desired time.
Press the ¬./>and >?//buttons to select
“
OPTION,” and press the MENU button again.
The OPTION OSD appears.
OPTION |
|
| ON |
ZZ... | 1 MIN |
| |
| UNLOCK |
MANUAL DEGAUSS | |
Press the ¬./>buttons to select “ 
(CONTROL
LOCK).”
OPTION |
|
AUTO |
|
ZZ... |
|
UNLOCK | LOCK |
CONTROL LOCK | |
Press the >?//buttons to select “LOCK.”
When PWR SAVE DELAY is set to “OFF,” the monitor does not go into power saving mode.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
Once you select “LOCK,” you cannot select any items except “EXIT” and ” 
OPTION” in the MENU OSD.
If you press any button other than the u (power) switch and
MENU button, the 
mark appears on the screen.
To cancel the control lock
To reset, press the RESET button while the OSD is on.
Repeat steps 1 through 3 above and press the >?// buttons to select “UNLOCK.”
16
