Using the LANG (Language) On- screen Display
English, French, German, Spanish, Italian and Japanese versions of the OSDs are available.
1Press the MENU button.
The MENU OSD appears.
MENU
2Press the ¬./>and >?//buttons to select
“ 
LANG,” and press the MENU button again.
The LANGUAGE OSD appears.
LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
I TA LIANO
3Press the ¬./>buttons to select the desired language.
ENGLISH: English, FRANÇAIS: French,
DEUTSCH: German, ESPAÑOL: Spanish,
ITALIANO: Italian, or 
: Japanese.
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.
To reset to English, press the RESET button while the OSD is on.
Customizing Your Monitor
Resetting the Adjustments
Resetting an adjustment item
1Press the MENU, ¬./>and >?//buttons to select the OSD containing the item you want to reset.
MENU
2Press the ¬./>buttons to select the item you want to reset.
3Press the RESET button.
RESET
GB
Resetting all of the adjustment data for
the current input signal
When there is no OSD displayed, press the RESET button.
All of the adjustments data for the current input signal is reset to the factory settings.
Note that adjustment data not affected by changes in input signal (OSD language, OSD position, input signal selection, power saving delay time and the control lock function) is not reset to the factory settings.
RESET
Resetting all of the adjustment data for all
input signals
Press and hold the RESET button for more than two seconds.
All of the adjustment data, including the brightness and contrast, is reset to the factory settings.
RESET
17
