Aging Mode
• Mode for repeating operations of the CD player automatically.
When errors occur:
Aging stops and a message indicating that an error has occurred such as “CD MEC ERR” is displayed. (For details of errors, refer to “Error History Display Mode”.)
When no errors occur:
Aging is repeatedly performed.
Procedure:
1.Load any CD.
2.Press the FUNCTION button and set the function to CD.
3.While pressing the PLAY MODE/TUNING MODE button and ^ (MD) button, press the 1/u button.
4.“AGING” is displayed on the fluorescent display tube briefly.
5.When the aging mode is set, the CD mark and MD mark on the fluorescent tube blink.
6.Pressing the ^ (CD) button starts aging. Operations are performed in the following sequence during aging.
Reading of TOC
Playback of first track
Playback of last track
CD tray open
CD tray close
7.To end aging, while pressing the PLAY MODE/TUNING MODE button and ^ (CD) button, press the 1/u button. (Hot reset is executed.)
Error History Display Mode
Mode for checking the history of errors which have occurred in the CD player.
Execute this mode after ending the aging mode.
Procedure:
1.Press the FUNCTION button, and set the function to “CD”.
2.While pressing the p(MD) button and )+/MD/CD/TUNING+ button, press the 1/u button.
3.“EMC@@EDC**” id displayed.
@@ : Number of mechanism errors (Past 3 errors)
**: Number of errors (NO DISC ERROR) which occurred after chucking (Past 3 errors)
4.To check the history of mechanism errors, press the PLAY MODE/TUNING MODE button, and to check BD errors, press the REPEAT/ 
STEREO/MONO button, and switch the display.
5.To end, press the 1/u button and turn OFF the power.
6.To erase the error history, perform COLD reset.
(While pressing the PLAY MODE/TUNING MODE button and p(CD) button, press the 1/u button.)
9
