ONE PUSH (
)
The white balance will be adjusted according to the ambient light.
1Touch [ONE PUSH].
2Frame a white object such as a piece of paper, to fill the screen under the same lighting conditions as you will shoot the subject.
3Touch [
].
flashes quickly. When the white balance has been adjusted and stored in the memory, the indicator stops flashing.
•Keep framing a white object while 
is flashing quickly.
•
flashes slowly if white balance could not be set.
•If 
keeps flashing even after you
have touched 
, set [WHITE BAL.] to [AUTO].
•If you changed the battery pack, or moved your camcorder to or from outdoors when [AUTO] was selected, aim your camcorder at a nearby white object with [AUTO] for about 10 seconds for better color balance adjustment.
•Redo the [ONE PUSH] procedure if you change the [PROGRAM AE] settings, or bring your camcorder outdoors from inside the house, or vice versa.
•Set [WHITE BAL.] to [AUTO] or adjust the color in [ONE PUSH] under white or cool white fluorescent lamps.
•The setting returns to [AUTO] when you set the POWER switch to OFF (CHG) for more than 12 hours.
COLOR SLOW S (ColorSlow Shutter)When you set [COLOR SLOW S] to [ON], you can record an image brighter in color even in dark places.
appears on the screen.
To cancel [COLOR SLOW S], touch [OFF].
•Adjust the focus manually ([FOCUS], p. 78) when it is hard to focus automatically.
•The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.
SUPER NS (SuperNightShot)The image will be recorded at a maximum of 16 times the sensitivity of NightShot recording if you set [SUPER NS] to [ON] while the NIGHTSHOT switch (p. 37) is also set to ON.
appears on the screen.
To return to the normal setting, set [SUPER NS] to [OFF].
•Do not use [SUPER NS] in bright places. This may cause a malfunction.
•Do not cover the infrared port with your fingers or other objects (p. 37).
•Remove the conversion lens (optional).
•Adjust the focus manually ([FOCUS], p. 78) when it is hard to focus automatically.
•The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.
| FADER |
|
|
|
|
|
| ||
|
|
|
|
|
| |||
You can record a transition with the |
| |||||||
Customizing | ||||||||
following effects adding to the interval | ||||||||
| ||||||||
between scenes. |
|
|
|
|
|
| ||
1 Select the desired effect in [STBY] (during |
| |||||||
fading in) or [REC] (during fading out) | your | |||||||
mode, then touch |
| . |
|
|
|
| ||
|
|
|
|
| ||||
2 Press START/STOP. |
|
|
|
|
| camcorder | ||
|
|
|
|
|
| |||
The fader indicator stops flashing and |
| |||||||
disappears when the fade is complete. |
| |||||||
To cancel the fader before starting the |
| |||||||
operation, touch [OFF] in step 1. |
| |||||||
If you press START/STOP, the setting is |
| |||||||
canceled. |
|
|
|
|
|
| ||
STBY |
| REC |
| |||||
Fading out |
| Fading in |
| |||||
Continued , 81