Still picture folder is full. Cannot record still pictures.
•Delete unnecessary images (p. 51) or perform [
FORMAT] (p. 62).
HD movie recording disabled. 
SD movie recording disabled.
•Movies cannot be recorded due to some limitations of the hard disk of the camcorder. However, you may be able to record still images.
Still recording disabled.
•Still images cannot be recorded due to some limitations of the hard disk of the camcorder. However, you may be able to record movies.
No more still pictures during movie recording.
•You are trying to record more than 3 still images, the maximum number that can be recorded at one time of recording with the Dual Rec function(p. 37).
No applicable files available.
• Image files have been deleted.
HDD format error.
•The hard disk of the camcorder is set differently from the default format.
Performing [
FORMAT] (p. 62) may enable you to use your camcorder. This will delete all data in the hard disk.
Data error.
•An error occurred during reading or writing the hard disk of the camcorder. This may occur when you keep applying shock on the camcorder.
Unable to access HDD.
•An error occurred during reading or writing the hard disk of the camcorder. This may occur when you keep applying shock on the camcorder.
Management file damaged. Create new file?
•The image management file is damaged. When you touch [YES], a new image management file is created. The old recorded images on the hard disk of the camcorder cannot be played back. (Image files are not damaged.) In this case, copy the image files to computer using the supplied software. See “First Step Guide” on the supplied
HD movie management information is damaged. Create new information?
•The HD movie management information is damaged. When you touch [YES], an HD movie management information is created. The old recorded images on the hard disk of the camcorder cannot be played back. (Image files are not damaged.) In this case, copy the image files to computer using the supplied software. See “First Step Guide” on the supplied
Buffer overflow
•You cannot record because the drop sensor senses a drop of the camcorder repeatedly. If you may be at risk of dropping the camcorder constantly, set the drop sensor to [OFF], and you may be able to record the image again
Troubleshooting
Continued , 105