“ ” is indicated on an image in the VISUAL INDEX screen.

•Loading of the data may have failed. It may be indicated correctly when you turn off the power and then turn it on again, or repeat removing and inserting the “Memory Stick Duo” a couple of times.

•This may appear on still images recorded on other devices, edited on a computer, etc.

•You removed the AC Adaptor or the battery pack before the ACCESS lamp is turned off after

recording. This may damage your image data and is displayed.

“ ” is indicated on an image in the VISUAL INDEX screen.

•The image data is damaged. Delete the image marked with (p. 51).

No sound or only a quiet sound is heard during playback.

•Turn up the volume (p. 41).

•Sound is not output when the LCD screen is closed. Open the LCD screen.

•When you record sound with [MICREF LEVEL] (p. 82) set to [LOW], the recorded sound may be difficult to hear.

•You cannot record sounds during [SMTH SLW REC].

Image data

The data file name flashes.

•The file is damaged.

•The file format is not supported on your camcorder (p. 110).

Viewing on the TV

You cannot view the image or hear the sound on the TV connected with the component video cable.

•Set [COMPONENT] according to the requirements of the connected device (p. 74).

•When you are using the component video cable, make sure the red and white plugs of the A/ V connecting cable are connected (p. 45, 47).

You cannot view the image or hear the sound on the TV connected with the HDMI cable.

•Images are not output from the HDMI OUT jack, if copyright protection signals are recorded in the images.

You cannot hear the sound.

•When you are using the component video cable, make sure the red and white plugs of the A/ V connecting cable are connected (p. 45, 47).

•When you are using the S VIDEO plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 48).

Troubleshooting

Continued , 97