On the battery pack

•Before changing the battery pack, slide the

POWER switch to OFF (CHG) and turn off the

(Movie) lamp/ (Still) lamp.

•The CHG (charge) lamp flashes during charging, or Battery Info (p. 25) will not be correctly displayed under the following conditions:

–The battery pack is not attached correctly.

–The battery pack is damaged.

–The battery pack is worn-out (For Battery Info only).

•When attaching an optional video light, it is recommended that you use an NP-QM71D or NP-QM91D battery pack.

•We do not recommend using an NP-FM30, which only allows short recording and playback times, with your camcorder.

On the charging/recording/playback time

•Times measured when using the camcorder at 25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is recommended).

•The recording and playback time will be shorter when you use your camcorder in low temperatures.

•The recording and playback time will be shorter depending on the conditions under which you use your camcorder.

On the AC Adaptor

•Use the nearby wall socket when using the AC Adaptor. Disconnect the AC Adaptor from the wall socket immediately if any malfunction occurs while using your camcorder.

•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.

•Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction.

PRECAUTION

•Even if your camcorder is turned off, AC power (mains) is still supplied to it while connected to the wall socket via the AC Adaptor.

Started Getting

27