Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.
•DUAL M (Main)Sound of the main language will be output.•DUAL S (Sub)Sound of the sub language will be output.•DUAL M/S (Main/Sub)Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.
•DUAL M+S (Main + Sub)Mixed sound of both the main and sub languages will be output.xA.V. SYNC. (Synchronizes audio with video output)Lets you delay the audio output so that the time gap between the audio output and visual display is minimized. You can adjust from
0 (0 ms) to 20 (200 ms) in 1 (10 ms) steps.Notes
•This parameter is useful when you use a large LCD or plasma monitor or a projector.
•This function does not work when:
–signals with a sampling frequency of more than 48 kHz is input.
–the multi channel Linear PCM signals are received via an HDMI IN jack.
xIN MODE (Switching the audio input mode)Lets you set the audio input mode of inputs. For details, see “Switching between digital and analog audio (IN MODE)” (page 60).
Settings for the video
(VIDEO menu)
You can use the VIDEO menu to make various adjustments for HDMI settings.Select
VIDEO menu parameters
xAUDIO FOR HDMI (Audio for HDMI)Lets you set the audio output for HDMI from the playback component connected to the receiver via an HDMI connection.
•AMPThe HDMI audio signals from the playback component is only output to speakers connected to the receiver.
Note
Audio signals are not output from the TV’s speakers when “AUDIO FOR HDMI” is set to “AMP”.
•TV+AMPThe sound is output from TV’s speaker and the speakers connected to the receiver.
Notes
•The sound quality of the playback component depends on the TV’s sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play
•When you connect the receiver to a video component (projector, etc.), sound may not be output from the receiver. In this case, select “AMP”.