Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U, UC only)With 3 ohm loads, both channels driven, from 170 – 20,000 Hz; rated 84 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.
Amplifier sectionModels of area code U, UC, CA Power Output1)
Stereo mode (rated) 84 W + 84 W (3 ohms at 170 – 20,000 Hz, THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz, THD 10%) FRONT2): 143 W/ch CENTER2): 143 W SUR2): 143 W/ch
(1.5 ohms at 80 Hz, THD 10%) SUBWOOFER2): 285 W
Models of area code CEL, CEK, AU, TW Power Output1)
Stereo mode (rated) 108 W + 108 W (3 ohms at 1 kHz, THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz, THD 10%) FRONT2): 143 W/ch CENTER2): 143 W SUR2): 143 W/ch
(1.5 ohms at 80 Hz, THD 10%) SUBWOOFER2): 285 W
Models of area code TH Power Output1)
Stereo mode (rated) 90 W + 90 W
(3 ohms at 1 kHz, THD 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz, THD 10%)
FRONT2): 125 W/ch
CENTER2): 125 W
SUR2): 125 W/ch
(1.5 ohms at 80 Hz, THD
10%)
SUBWOOFER2): 210 W
1)Measured under the following conditions:
Area code | Power requirements |
U, UC, CA | 120 V AC, 60 Hz |
|
|
CEL, CEK | 230 V AC, 50 Hz |
|
|
AU | 240 V AC, 50 Hz |
|
|
TW | 110 V AC, 60 Hz |
|
|
TH | 220 V AC, 50 Hz |
|
|
2)Reference power output for front, center, surround speakers and subwoofer. Depending on the sound field settings and the source, there may be no sound output.
Inputs |
|
| |
Analog | Sensitivity: 1 V/50 kohms | ||
Digital (Coaxial) | Impedance: 75 ohms | ||
Tone |
|
| |
Gain levels | ±10 dB, 0.5 dB step |
| |
InformationAdditional | |||
|
|
Reproduction frequency range:
28 – 20,000 Hz
continued
71GB