Sony HTSF2300, HT-SS2300 About the indicators on the display, NSW, ALFE, Note, Note, COAX, KOPT, L;PL, MDTS, Note, EHDMI, ;PLII, BSLEEP, HTuner, FPreset, station, D.RANGE, Playback

About the indicators on the display

12		3		4	5
SLEEP	L	C	R	DIGITAL	HDMI
LFE	SL		SR	DTS	PL
SW		S			OPT COAX

	qf	qd qs qa q;
Name		Function
ALFE		Lights up when the disc being
		played back contains an LFE
		(Low Frequency Effect) channel
		and the LFE channel signal is
		actually being reproduced.
BSLEEP		Lights up when the sleep timer is
		activated (page 62).

CPlayback The letters (L, C, R, etc.) indicate

channel the channels being played back. indicators The boxes around the letters vary

to show how the receiver downmixes the source sound.

LFront LeftRFront RightCCenter (monaural)

SL	Surround Left
SR	Surround Right

SSurround (monaural or the surround components obtained by Pro Logic processing)

Example:Recording format (Front/ Surround): 3/2.1Sound Field: A.F.D. AUTO

L C R

SW SL SR

D; DIGITAL Lights up when receiver is decoding Dolby Digital signals.

Note

When playing a Dolby Digital format disc, be sure that you have made digital connections and that IN MODE is set to “AUTO”.

EHDMI	Lights up when a playback
	component is connected to this
	receiver using an HDMI jack
	(page 20).

6	7
	D.RANGE
	MEMORY		RDS
		ST MONO

	9 8
Name	Function
FPreset	Lights up when using the receiver
station	to tune in radio stations you have
indicators	preset. For details on presetting
	radio stations, see page 50.

GD.RANGE Lights up when dynamic range compression is activated (page 36).

HTuner	Lights up when using the
indicators	receiver to tune in radio stations
	(page 49), etc.
	Note
	“RDS” lights up for models of
	area code CEL, CEK only.

IMEMORY Lights up when a memory function, such as Preset Memory (page 51), etc., is activated.

JCOAX Lights up when DVD input is selected and the source signal is a digital signal being input through the COAX IN jack.

KOPT	Lights up when IN MODE is set
	to “AUTO” and the source signal
	is a digital signal being input
	through the OPT IN jack.
L;PL/	“; PL” lights up when the
;PLII	receiver applies Pro Logic
	processing to 2 channel signals
	in order to output the center and
	surround channel signals.
	“; PLII” lights up when the
	Pro Logic II Movie/Music
	decoder is activated.
MDTS	Lights up when the receiver is
	decoding DTS signals.
	Note
	When playing a DTS format
	disc, be sure that you have made
	digital connections and that IN
	MODE is set to “AUTO”.
NSW	Lights up when the audio signal
	is output from the
	SUBWOOFER jack.

8GB