cable connected, the computer may hang up or may not recognize this camcorder.

Importing a picture to the computer

1 Turn on the analog device.

2 Set the POWER switch to VCR.

Connect your camcorder to the wall socket using the supplied connecting cable (DK-

415)and AC Adaptor/charger for the power supply.

3 Press MENU.

4 Select the (IN/OUT REC) menu by turning the SEL/PUSH EXEC dial, then press the dial.

5 Select [A/V t DV OUT] by turning the SEL/PUSH EXEC dial, then press the dial.

6 Select [ON] by turning the SEL/PUSH EXEC dial, then press the dial.

7 Press MENU to hide the menu screen.

8 Start playback on the analog device.

9 Start importing on the computer.

Refer to the manual supplied with the program software or its on-line help for details.

After importing the picture and sound

Stop importing on the computer, and stop playback on the analog device.

bNote

•Your camcorder may not be able to output the signal to the computer correctly depending on the video signal input to your camcorder.

•You cannot import pictures that have been recorded using a copyright protection signal to a computer via your camcorder.

•Analog signals are not output from the COMPONENT OUTPUT jack.

106Dubbing/Editing