Connect your camcorder to a VCR using an i.LINK cable (optional).
HDV/DV jack
i.LINK cable (optional)
Signal flow
To select the video format to be dubbed
The video format to be dubbed depends on the settings of [VCR HDV/DV] (p. 71) and [i.LINK
CONV] (p. 74) on the (IN/OUT REC) menu. Before setting these menu items, disconnect the i.LINK cable.
•When [VCR HDV/DV] is set to [AUTO], [HDVtDV CONV] to [ON], and [AUDIO LOCK] to [LOCK MODE] in [i.LINK CONV], HDV pictures are dubbed as audio- locked signals, and DV pictures are dubbed as they are, disregarding the [AUDIO LOCK] setting.
•When [VCR HDV/DV] is set to [AUTO], [HDVtDV CONV] to [ON], and [AUDIO LOCK] to [UNLOCK MODE] in [i.LINK CONV], HDV pictures are dubbed as audio- unlocked signals, and DV pictures are dubbed as they are, disregarding the [AUDIO LOCK] setting.
•If the tape was recorded with the HDV and DVCAM (DV) formats mixed, set [VCR HDV/DV] to [DV] to dub only pictures in the DVCAM (DV) format. Pictures in the HDV format will be dubbed as blank portions, so neither picture nor sound will be dubbed.
i.LINK compatible devices
i.LINK jack
b Note | Dubbing/Editing |
| |
• If you change the settings of [VCR HDV/DV] and |
|
[i.LINK CONV] with the i.LINK cable connected, |
|
the video device may not be able to recognize the |
|
video signal from the camcorder at the time of |
|
dubbing. |
|
• If [HDVtDV CONV] is set to [OFF] in [i.LINK |
|
CONV] while [VCR HDV/DV] is set to [AUTO], |
|
pictures recorded in the HDV mode will be recorded |
|
as blank portions, so neither picture nor sound will |
|
be recorded. |
|
• When [VCR HDV/DV] is set to [HDV], the |
|
connected DVCAM (DV) device cannot recognize |
|
pictures, so pictures will be dubbed as blank |
|
portions. |
|
• When [VCR HDV/DV] is set to [AUTO] and the |
|
signal switches between HDV and DVCAM (DV), |
|
the picture and sound disappear temporarily. |
|
Dubbing/Editing 91