5 Select [PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial.

6 Select the first 2 digits by turning the SEL/PUSH EXEC dial, then press the dial.

7 Repeat step 6 to set up the other digits.

8 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.

9 Press MENU to hide the menu screen.

To cancel the user bits setting

Select [CANCEL] in step 8.

To reset the user bits

Select [RESET] in step 5.

To set the user bits to the real time clock

Select the (TC/UB SET) menu, [UB TIME REC], then [ON].

bNote

•User-bit values appear at every 3 frames for the tape recorded in the HDV format.

•When you input HDV format signal via i.LINK connection, the user-bits are copied, however, they are not regenerated.

Switching the time value

Press TC/U-BIT.

Each time you press the button, the time value changes between the time code and user bits. TC: 00:00:00:00 or 00:00.00:00

U-BIT:00 00 00 00

bNote

•The time code and user bits cannot be displayed properly if the tape does not have time code and/or user bits recordings or if the time code was recorded using a non-compatible method.

•When you input HDV format signal via i.LINK connection, the user-bits of the input video are written on this camera, however, they are not displayed during dubbing.

104Dubbing/Editing