Sony HVR-Z1E/Z1P Dubbing to another tape

Dubbing to another tape

1 Connect the recording device to your camcorder (p. 90).

2 Prepare the recording device.

•Insert a cassette for recording.

•If the recording device has an input selector, set it to the input mode.

3 Prepare your camcorder for playback.

•Insert the recorded cassette.

•Set the POWER switch to VCR.

4 Start the playback on your camcorder, and record it on the VCR.

Refer to the operating instructions supplied with your VCR for details.

5 When the dubbing is finished, stop your camcorder and the VCR.

bNote

•When you use an i.LINK cable, the recorded picture becomes rough when a picture is paused on your camcorder while recording it to a VCR.

•Pictures recorded in the HDV format are not output

from the HDV/DV jack during playback pause or in playback modes other than normal playback.

•When you use an i.LINK cable, you cannot record the picture and sound separately.

zTip

•The i.LINK lamp, HDV or DV, on the HDV/DV jack holder will light up and indicate the format of the output signal when you use an i.LINK cable.

•When you use an i.LINK cable, the video and sound signals are transmitted digitally, producing high quality pictures.

Dubbing/Editing

Dubbing/Editing 93