Sony HVR-Z1E/Z1P AUDIO MONI, AUDIO MIX, AUDIO OUTPUT, SET) menu, Using the (AUDIO, Menu the Using, SET) menu – INT MIC SET/XLR SET, etc

Using the (AUDIO

SET) menu – INT MIC SET/XLR SET, etc.

You can select the items listed below on the AUDIO SET menu. For details on how to select items, see “Selecting menu items” (p. 58). The default settings are marked with G. The indicators in parentheses appear when the

setting is selected. The settings you can adjust vary depending on the power mode of your camcorder. The screen shows the items you can operate at the moment. Unavailable items will be grayed out.

	AUD I O SET	STBY
	RETURN
	AUD I O MON I	CH1,CH2
	AUD I O OUTPUT
	AUD I O MODE
	AUD I O LOCK
	AUD I O L I M I T
	M I C NR
	M I C SELECT
[ MENU ] : END

AUDIO MONI

You can check the sound from headphones or the camcorder speaker by selecting either of them.

GCH1,CH2	Select to listen to the CH1 and CH2 sounds separately in the L and R
	channels. However, you will hear the CH1 and CH2 sounds mixed
	from your camcorder speaker.
CH1	Select to listen to the CH1 sound in channels L and R.
CH2	Select to listen to the CH2 sound in channels L and R.
CH1+CH2	Select to listen to the CH1 and CH2 sounds synthesized in channels L
	and R.

AUDIO MIX

You can select the sound to be output when playing back a tape on which sounds were added afterwards (p. 99).

GCH1,CH2	Select to output only the originally recorded sound (CH1, CH2).
MIX	Select to synthesize and output the originally recorded sound (CH1,
	CH2) and the sound added afterwards (CH3, CH4).
CH3,CH4	Select to output only the sound (CH3, CH4) added afterwards.

bNote

•You cannot select this item when playing back a tape recorded with [AUDIO MODE] set to [FS48K].

AUDIO OUTPUT

You can select the audio output level to speakers, etc.

1Vrms	Select to set the audio output level to 1 Vrms/FS.
G2Vrms	Select to set the audio output level to 2 Vrms/FS.

,continued

Menu the Using

Using the Menu 65