To attach a microphone, using a CAC-12

When attaching a long-type microphone, such as an ECM- 674/678, use an optional CAC-12 Microphone Holder.

1 1 Remove the front screw-hole cover on the top then
2fix the CAC-12 in place with the two screws (+B4⋅8) supplied with the CAC-12.

2

CAC-12

2

1 1

Tripod adaptor

Platform

1

2 Loosen the screw to open the CAC-12 and attach the microphone.

If the microphone diameter is small, attach the adaptor A (supplied with the CAC-12 or the microphone) to the microphone.

A

Mounting the Camera to a Tripod

Mount the camera to a tripod, using an optional VCT-U14 Tripod Adaptor.

Caution

•Select an appropriate hole from among those at the bottom of the tripod adaptor considering the balance of the weight of the camera and the tripod adaptor. If an inappropriate hole is selected, the camera may fall over.

•Check that the size of the selected hole matches that of the screw of the tripod. If they do not match, the tripod adaptor cannot be attached to the tripod securely.

2

1 1 Attach the tripod adaptor to the tripod and 2 secure it with the screw.

2 Place the camera on the tripod adaptor and slide forward it along the groove of the tripod adaptor until it clicks.

To remove the camera from the tripod adaptor

Hold down the red button and pull the lever in the direction of the arrow.

Lever

Red button

If the pin of the tripod adaptor does not return to its original position

After removing the camera, if the pin of the tripod adaptor does not return to its original position, hold down the red button and move the lever in the direction of the arrow to return the pin to its original position. It is not possible to mount a camera with the pin not seated.

12 Installation