Other convenient tape functions
Skipping the blank portions on the tape
You can skip blank portions between the tunes (Blank Skip).
When this function is on, the unit skips blank portions of 15 seconds or more,
•See also “Changing the general settings (PSM)” on page 21.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 22.)
2 Press ¢ or 4 to select “B. SKIP” (blank skip).
.
3 Press + to select “ON.”
Now Blank Skip is activated.
4 Press SEL (select) to finish the setting.
To cancel Blank Skip, repeat the same procedure and select “OFF” in step 3 by pressing
Playing the current tune repeatedly
1 Press MODE ATT while playing a | ENGLISH |
You can play the current tune repeatedly (Repeat |
|
Play). |
|
tape. |
|
| |
“MODE” appears on the display. |
|
2 Press RPT while “MODE” is still on the display so that the RPT indicator lights up on the display.
Each time you briefly press the
button, Repeat Play turns on and off alternately.
Lights up when Repeat Play is turned on.
Note:
•In the following cases, Blank Skip and Repeat Play may not operate correctly:
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short
–Tapes with high level noise or humming between tunes.
–The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with no Dolby NR.
17