JVC KS-LX200R Storing DAB services in memory, To tune in a particular ensemble without searching

To change the display information while tuning into an ensemble

Normally service name is shown on the display. If you want to check the ensemble name or its frequency, press DISP.

Each time you press the button, the following information appears for a while on the display.

Service name

Ensemble name

Channel number

Frequency

To tune in a particular ensemble without searching:

1 Press SOURCE (BAND) to select DAB tuner as the source.

2 Press and hold ¢or 4 for more than 1 second.

3 Press ¢ or 4 repeatedly until the ensemble you want is reached.

•If you hold down the button, the frequency keeps changing until you release the button.

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2 and DAB3) manually.

1 Select the DAB tuner (DAB1–3).

1 Press SOURCE (BAND) to select DAB tuner as the source.

2If necessary, press and hold SOURCE (BAND) repeatedly to select the DAB band number (DAB1, DAB2 or DAB3.)

Each time you press and hold the button, the DAB band changes as follows:

DAB1 DAB2 DAB3

2 Tune into an ensemble you want.

3 Select a service of the ensemble you want.

1Press MODE ATT.

“MODE” appears on the display.

2 Press ¢ or 4 to select a service you want, while “MODE” is still on the display.

CONTINUED ON THE NEXT PAGE

ENGLISH

31