|
| TAPE OPERATIONS |
| S | ENGLISH |
| MS |
|
/ |
| 0 |
Listening to a tape
1 Open the cassette compartment.
0
2 Insert a cassette into the cassette compartment.
The unit draws the cassette, and tape play starts
automatically after the
ON | display panel moves up. |
“Cassette in” indicator appears.
Notes:
•When a cassette is already in the cassette compartment, select tape as the source by pressing SOURCE (23) to start tape play.
•When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
3 Select the tape direction.
Each time you press and hold SOURCE (23), the tape direction changes alternately
forward ( ) and
reverse ( ).
To stop play and eject the cassette
Press 0 OFF briefly.
Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one.
If you change the source, the tape play also stops (without ejecting the cassette this time).
•You can eject the cassette while the ignition key is turned off by pressing ¢ or 4 .
To close the display panel, press ¢ or
4 .
•Turning on or off the ignition key does not close the display panel. To close it, press ¢ or 4 .
CAUTION
| NEVER insert your finger |
| between the display panel |
| and the unit, as it may get |
ON | caught in the unit. |
To fast-forward and rewind a tape
Press ¢ for more than 1 second to
Press 4 for more than 1 second to rewind the tape.
When the tape reaches its end, playback of the same side starts.
To stop fast forward and rewind at any position
on the tape, press and hold SOURCE (23). Tape play starts from that position on the tape.
Note:
When the tape reaches its end while
15