Miele 09 898 020 operating instructions Showroom Program, Factory default, Lift panel, Demo Mode

Settings

Showroom Program

This mode enables the oven to be demonstrated in showrooms without heating up. It should not be set for domestic use.

Demo Mode

If you have demo mode activated

Demo Mode is active. The appliance will

not heat up will appear when you turn on the oven.

–On

Touch OK for at least 4 seconds to activate demo mode.

–Off

Touch for at least 4 seconds to deactivate demo mode. The oven can then be used as normal.

Factory default

–Settings

Any settings that have been altered will be reset to the factory default setting.

–Favorites

All Favorites will be deleted.

–Default temperatures

Any default temperatures that have been changed will reset to the factory default settings.

–MyMiele

All MyMiele entries will be deleted.

Lift panel

Regardless of the setting selected, as soon as you start the self-cleaning cycle, the lift panel goes down automatically.

–Automatically

The lift panel lifts up automatically as soon as you switch the oven on.

The lift panel goes down automatically as soon as you switch the oven off.

–Manual

Touch the lift panel sensor button to lift the control panel up and put it down.

68