Cleaning and care
Preparing for the Self Clean program
The high temperatures used during self cleaning will damage accessories that are not designed for cleaning in the Self Clean program. Please remove these accessories from the oven before starting the Self Clean program. This also applies to accessories purchased separately.
The following accessories are suitable for cleaning during the Self Clean program and can remain in the oven:
–Shelf runners,
–FlexiClips with wire rack
–Wire oven rack
Take all accessories that are not "Self Clean safe" out of the oven.
Place the wire oven rack on the top shelf level.
If not removed, coarse soiling can smoke and cause the Self Clean program to turn itself off.
Remove any coarse soiling before running the Self Clean program.
Starting the Self Clean program
Danger of burns!
When Self Cleaning the front of the oven becomes hotter than with normal oven use.
Prevent children from touching the oven during the Self Clean program.
Select Maintenance.
Select Self Clean.
Select the level required according to
the level of soiling.
Confirm with OK.
Follow the instructions in the display.
Confirm with OK.
Starting the Self Clean program
To start the Self Clean program immediately, select Start Now.
Confirm with OK.
The Self Clean program will now start.
The door locks automatically. The oven heating and the cooling fan will then turn on automatically.
The oven light will not turn on during the Self Clean program.
The remaining time for the Self Clean program appears. The duration cannot be changed.
You can use the timer while the Self Clean program is running. At the end of the kitchen timer time the buzzer will sound and the Timer symbol will flash. The time will then continue to increase in the display.
126
