Cleaning and care
As soon as "Timer" is pressed, the buzzer and the flashing indicator will turn off.
Delaying the start of the Self Clean program
To delay the start of the Self Clean program, select Start Later.
Set the time you would like the program to start at.
Confirm with OK.
The door will lock automatically. Start at and the set start time appear in the display.
Up until the start time you can alter the start and end time with Change.
As soon as the start time has been reached, the oven heating and the cooling fan will turn on automatically. The duration remaining will appear in the display.
At the end of the Self Clean program
When the duration remaining reaches 00:00 h, a message will appear in the display to tell you that the door is unlocking.
When the door lock has been deactivated:
–Program Finished appears in the
display,
–A buzzer will sound if turned on (see "Settings - Volume - Buzzer tones").
Turn the oven off.
Acoustic and visual signals are turned off.
Danger of burns!
Danger of burns! Wait until the oven has cooled down before removing any residual soiling left in the oven compartment from the Self Clean program.
Wipe any residues (e.g.ash) left behind after the Self Clean program out of the oven compartment and off of any accessories. The amount of ash will vary depending on how dirty the oven was.
Most soiling can be easily removed using a clean, soft sponge and a mild solution of warm water and liquid dish soap.
Depending on the degree of soiling before cleaning, there may be a visible layer of soiling across the inner glass pane on the door. This should be removed using the scouring side of a dish sponge or with a stainless steel spiral sponge and liquid dish soap.
127
