Miele 09 898 020 Problem Possible cause and solution Noise can be heard, After the appliance is

		Frequently asked questions
Problem		Possible cause and solution
A noise can be heard		The fan will continue running until the appliance has
after the appliance is		cooled down. It will then switch itself off
turned off.		automatically.
One or several burners		The burner knob has been turned to the right or left
flash  in the display.		for more than 30 seconds.
		 Turn the knob to 0. If the error message does not
		go out, there is a technical fault. Call Customer
		Service.
The knob is not on Off;		There was a power interruption during operation.
a power level is set for		The burner has been turned on for more than 3
the burner. The burner
		minutes without a suitable pan on it.
does not heat up.
 lights up in the display		The maximum operating time for the burner has been
or flashes in alternation		exceeded.
with .		 Turn the burner knob to 0.
		The burner can be started up again.
	flashes in the	There is a fault in the electronics.
	display in	 Disconnect the power supply of the cooktop for
	alternation with	approx. 1 minute. If the problem persists after
	numbers.	reconnecting the power supply, contact Miele
		Customer Service.
This display is dark.		The time of day display is deactivated. When the
		appliance is turned off, the time of day display is
		turned off.
		 As soon as the oven is turned on, the time of day
		will appear. If you want it to be displayed
		continuously, the setting to turn the time of day
		display back on must be changed (see "Settings –
		Time of day - Display").
		There is no power to the appliance.
		 Check if the circuit breaker has tripped.
System Lock  appears		The system lock  is On.
in the display when the		 You can unlock the oven to start a cooking
oven is turned on.		program by pressing  for at least 6 seconds.
		 To permanently deactivate the lock, see "Settings
		- System Lock ".

135