To output as HD-SDI
Menu page | Item | Setting |
<POWER SAVE> | SDI OUT | ACTIVE |
|
|
|
<SDI OUT> | OUTPUT | MAIN |
|
|
|
To output as SD-SDI
Menu page | Item | Setting |
<POWER SAVE> | SDI OUT | ACTIVE |
|
|
|
| DOWN CONVERTER | ACTIVE |
|
|
|
<DOWN CONVERTER> | OUTPUT SIGNAL | MAIN |
|
|
|
<SDI OUT> | OUTPUT | |
|
|
|
To output as VBS
Menu page | Item | Setting |
<POWER SAVE> | DOWN CONVERTER | ACTIVE |
|
|
|
<DOWN CONVERTER> | OUTPUT SIGNAL | MAIN |
|
|
|
<TEST OUT> | OUTPUT | VBS |
|
|
|
Constantly outputting a return video
•When a CCU is connected, one of the signals being supplied to the CCU can be output from the camera.
•The last selected return signal is output.
•The same character information as that displayed on the viewfinder screen can be added to the output signal by setting CHARACTER to ON on the <SDI OUT> or <TEST OUT> page.
To output as
Menu page | Item | Setting |
<POWER SAVE> | SDI OUT | ACTIVE |
|
|
|
<SDI OUT> | OUTPUT | RET |
|
|
|
To output as
Menu page | Item | Setting |
<POWER SAVE> | SDI OUT | ACTIVE |
|
|
|
| DOWN CONVERTER | ACTIVE |
|
|
|
<DOWN CONVERTER> | OUTPUT SIGNAL | RET |
|
|
|
<SDI OUT> | OUTPUT | |
|
|
|
To output as VBS
Menu page | Item | Setting |
<POWER SAVE> | DOWN CONVERTER | ACTIVE |
|
|
|
<DOWN CONVERTER> | OUTPUT SIGNAL | RET |
|
|
|
<TEST OUT> | OUTPUT | VBS |
|
|
|
Outputting the same image as that on the viewfinder screen
•With
The output is synchronized with switching among Y, R, G, and B or switching to a return signal.
•With
Information other than CHARACTER (such as VF MARKER, VF DETAIL, and ZEBRA) cannot be added to the output.
Note
With the settings for outputting the same image as that on the viewfinder, the output will be obtained in 1080i, even if the format setting is 720P.
To output as
Menu page | Item | Setting |
<POWER SAVE> | SDI OUT | ACTIVE |
|
|
|
<SDI OUT> | OUTPUT | VF |
|
|
|
To output as
Menu page | Item | Setting |
<POWER SAVE> | SDI OUT | ACTIVE |
|
|
|
| DOWN CONVERTER | ACTIVE |
|
|
|
<DOWN CONVERTER> | OUTPUT SIGNAL | VF |
|
|
|
<SDI OUT> | OUTPUT | |
|
|
|
To output as VBS
Menu page | Item | Setting |
<POWER SAVE> | DOWN CONVERTER | ACTIVE |
|
|
|
<DOWN CONVERTER> | OUTPUT SIGNAL | VF |
|
|
|
<TEST OUT> | OUTPUT | VBS |
|
|
|
Outputting a prompter signal
The VBS signal supplied to the PROMPTER connector of the CCU is output from the PROMPTER/GENLOCK/RET connector of the camera.
Outputting a Trunk Signal
The trunk signal can be used for communication between an external device connected to the REMOTE connector of the camera and an external device connected to the TRUNK connector of the CCU.
To output the trunk signal from the REMOTE connector
Menu page | Item | Setting |
|
|
|
<TRUNK> TRUNKON
18 | Preparatory Settings |
|
|