Sony ICF-SW07 Receiving SSB and CW Transmissions, 30GB, 2 Press FM/AM and select AM, 4 Tune in to the desired station, 3 Press SSB to select USB or LSB/CW

Receiving SSB and CW Transmissions

You can receive SSB (Single Side Band) and CW (Continuous Wave) transmissions with the built-in BFO circuit.

		ABC	DEF	GHI		POWER
FM/AM	FM/	1	2	3	SYNC	ON/
						OFF
	AM	JKL	MNO	PQR
	AM BAND	4	5	6	SSB	SLEEP
		STU	VWX	YZ	DST
	LOCAL/	7	8	9	ERASE
	WORLD		<>/	DISPLAY
	LABEL EDIT				TIME SET LIGHT
		DIRECT	0	EXE	ENTER
	TIMERSTANDBY/			TIME SET
	STANDBY TIME SET			TIME DIFF		JOG/
	a	b
						TUNE/
	STANDBY MEMORY					SCAN˚
			SW STATION CALL
	MY	DW	VOA BBC			OTH

HOLD

POWER ON/OFF

SSB

1 Press POWER ON/OFF to turn on the radio.

2 Press FM/AM and select AM.

3 Press SSB to select USB or LSB/CW.

Each time SSB is pressed, the display changes as follows:

(Normal mode) USB LSB/CW

4 Tune in to the desired station.

For tuning methods, see “Various ways of reception”, pages 16 to 29.

Tip

For more on SSB and CW, refer to “Tips on radio waves”, page 50.

Notes

•The USB or the LSB/CW mode cannot be preset to memory. You can tune in to stations in 0.1 kHz steps in the USB or the LSB/CW mode, but the frequency digit below the decimal point is ignored when memorized.

•If a preset AM frequency is recalled during the USB or the LSB/CW mode, the mode setting remains active and the frequency is received in the respective mode.

30GB Listening to the radio