Setting Up1 Unfold the antenna module slowly.

Be careful not to hit anyone or anything when unfolding the antenna module.

2 Pull out the long cord with the double pin plug from the antenna controller until it stops, and connect it to the antenna module.

3 Attach the antenna module to the window glass or the curtain.

Fix the antenna with the supplied clip or the suction cup, as seen in the illustration on the previous page.

4 Connect the short cord with a single pin plug to the AM EXT ANT (AM external antenna) jack of the radio.

To AM EXT ANT

The power supply of the antenna controller is linked to the power supply of the radio. The POWER lamp lights up on the controller. Switch ATT to OFF on the radio.

On setup

Place the antenna module where reception is well, such as by the window.

Reception may become poorer if the long cord of the antenna controller is kept near the radio. Keep it as far away from the radio as possible.

Keep the radio and the antenna away from fluorescent lamps, television sets, telephones, personal computers, etc., as they may generate noise interference.

Set up the antenna as far away from the street as possible.

Do not use the antenna outdoors.

When using the external antenna, be sure to retract the telescopic antenna on the main unit.

operations Other

Other operations 33GB