Sony ICF-SW07 Setting the clock, 3 Press DST if your area is now under daylight saving time, 1 If the radio is turned on, press POWER ON/OFF to turn it off

Setting the clock

Setting the Local Time

Set the clock if “0:00” flashes in the display (i.e., when you installed the batteries for the first time or after you reset the clock). Set the clock with the radio turned off.

	ABC	DEF	GHI		POWER
FM/	1	2	3	SYNC	ON/
					OFF
AM	JKL	MNO	PQR
AM BAND	4	5	6	SSB	SLEEP
	STU	VWX	YZ	DST
LOCAL/	7	8	9	ERASE
WORLD		<>/	DISPLAY
LABEL EDIT				TIME SET LIGHT
	DIRECT	0	EXE	ENTER
TIMERSTANDBY/			TIME SET
STANDBY TIME SET			TIME DIFF		JOG/
a	b
					TUNE/
STANDBY MEMORY					SCAN˚
		SW STATION CALL
MY	DW	VOA BBC			OTH

HOLD

POWER

ON/OFF

DST

TIME SET

¿/÷

–¿/÷+

LOCAL time signifies the time for your time zone, while WORLD time is the time for any other time zone in the world.

Clock adjustment is done in LOCAL time. Before setting the clock, refer to the table on page 15 and check the time difference between your area and the UTC (Coordinated Universal Time). Names of major cities and their time differences from the UTC are preset in the unit’s memory.

1 If the radio is turned on, press POWER ON/OFF to turn it off.

2 Hold down TIME SET and press ¿or ÷to choose a city or the time difference between your local time and the UTC.

When TIME SET is pressed, the clock display will automatically switch to LOCAL time if WORLD time had been displayed. The LOCAL indication flashes. Each

time you press ¿or ÷, the time zone indicator will move to the right

or left.

When you release TIME SET, LOCAL indication will stop flashing and light up. Your local time zone has been selected.

3 Press DST if your area is now under daylight saving time.

sappears in the display.

If daylight saving time is not used in your area, or if sis already displayed, skip this step.

12GB Preparation