DSCover Satellite Products PC1555MX installation manual System Introduction, Specifications

Section 1: System Introduction

1.1		Specifications		Digital Communicator Specifications*
Downloading Software Support				• Supports major communication formats including SIA and
					Contact ID
• PC1555MX v2.3 uses DLS-3 v1.3 and higher.
				• Digital Communicator compatible receivers and their formats:
Flexible Zone Configuration
					Silent Knight Model 9000: 3/1, 4/1, 4/2 non-extended, 3/1
• Six fully programmable zones
					extended, 20 bps, 1400 Hz handshake.
• System expandable to 32 zones using:
					Ademco	Model	685: 3/1,	4/1,	4/2	non-extended,	3/1
	• up to 8 keypad zone inputs and/or
					extended, 20 bps, 1400 Hz handshake, Contact ID.
	•	up to 32 wireless	zones with the PC5132 wireless
					Sescoa Model 3000: 3/1,			4/1,	4/2	non-extended,	3/1
		expansion module
					extended, 20 bps, 1400 Hz handshake.
•	38	access codes: one	master code, one maintenance
					Radionics	Model	D6500:	3/1,	4/2	non-extended,	3/1
	code, two duress codes, two supervision codes and 32
					extended, with or without parity, 1400 and 2300 Hz hand-
	general access codes
					shake.Sur-Gard Model MLR2-DG: 3/1, 4/1, 4/2, without parity,
• 27 zone types; 8 programmable zone attributes
					20 bps, 1400 and 2300 Hz handshake, Contact ID, SIA.
• Normally closed, single EOL and double EOL zone wiring				•	Event-initiated personal paging
• 32 wireless zones with the PC5132 Wireless Receiver				• Three programmable telephone numbers
Audible Alarm Output				•	Two account numbers
• 700mA Supervised Bell Output (current limited at 3A), 12VDC				• Supports LINKS1000 cellular communication
• Steady or Pulsed Output				• Supports LINKS2X50 long range radio transmitter
EEPROM Memory				•	Supports Skyroute transceiver
• Does not lose programming or system status on complete				• DTMF and pulse dialing
	AC and Battery failure			•	DPDT line seizure
Programmable Outputs				• Anti-jam feature
				• Split reporting of selected transmissions to each telephone
• One programmable voltage output and one programmable
					number
	voltage output/input; 23 programmable options
				System Supervision Features
• PGM1 = 50mA; PGM2 = 300mA (50/300 products)
• PGM2 = 50mA; PGM2 = 50mA (50/50 products)				The PC1555MX continuously monitors a number of possible
• Eight additional low current (50mA) outputs available using				trouble conditions including:
	the PC5208 module			•	AC power failure			• AUX Power Supply Trouble
•	Four additional high current (300mA) outputs available			•	Fault by zone			• Loss of internal clock
	using the PC5204 module; one PC5204 output fully super-			•	Tamper by zone			• Bell output trouble
	vised for siren			•	Fire trouble			• Telephone line trouble
Powerful 1.5 Amp Regulated Power Supply				•	Failure to communicate			• Low battery condition (panel)
• 550 mA Auxiliary Supply, 12 VDC				• Low battery by zone (wireless)
• Positive Temperature			Coefficient (PTC) components	• Module fault (supervisory or tamper)
	replace fuses			False Alarm Prevention Features
• Supervision for loss of AC power, low battery				•	Audible Exit Delay			• Quick Exit
• Internal clock locked to AC power frequency				•	Audible Exit Fault			• Cross Zone Burglary Alarm
Power Requirements				•	Communication Delay			• Rotating Keypress Buffer
• Transformer = 16.5 VAC, 40VA				•	Urgency on Entry Delay			• One Restart of Exit Delay
• Battery = 12 volt 4 Ah minimum rechargeable sealed lead				Additional Features
	acid battery			• Auto Arm at specified time
• For household fire and burglary installations, two 7Ah bat-				• Keypad-activated alarm output and communicator test
	teries in parallel must		be used, providing 24 hours of	• All modules connect to the system via a four wire Keybus
	standby power and 4 minutes of alarm output power.
					up to 1000’/305m from main panel
• For commercial burglary installations, a 4Ah (or larger) bat-
				•	An event buffer which records the past 128 events with
	tery must be used, providing at least 4 hours of standby
					both the time and date at which they occurred; buffer can
	power and 4 minutes of alarm output power.
					be printed using PC5400 serial interface module, or
WARNING: Do not install this panel outside of North America.
					viewed with the LCD5500Z keypad and DLS-3 software
By design, this panel will not work if the AC line frequency				• Supports the addition of the PC5132 wireless receiver for
drops below 55.5Hz.					integration of wireless devices
Remote Keypad Specifications				• Uploading and downloading capability
•	Keypads available:			•	Local downloading capability through the use of						the
	- PC5508Z eight zone LED keypad with zone input				PC-Link adaptor
	- PC5516Z sixteen zone LED keypad with zone input			• Supports the Escort5580 Voice Prompt Module with auto-
	- PC5532Z thirty-two zone LED keypad with zone input				mation/lighting control
	- LCD5500Z Alphanumeric keypad with zone input			• Supports the addition of the PC5928 Audio Interface Mod-
	- LCD5501Z fixed message LCD keypad with zone input				ule to integrate intercom stations
	- LCD5501Z32-900 keypad / receiver			•	Added Keybus fault protection: clock and data outputs
• All keypads have five programmable function keys					have been programmed to withstand shorts to +12v to pre-
• Connect up to eight keypads					vent control panel damage
• 4-wire (Quad) connection to Keybus

• Built in piezoelectric buzzer
*LINKS1000, LINKS2X50, and SkyrouteWWW.DIYALARMFORUM.COMhave not been investigated by UL.	1