1.2Additional Devices
In addition to the information below, see the back cover for a DSC module compatibility table.
PC5132 Wireless Receiver
The PC5132 Wireless Receiver can be used to connect up to 32 wireless devices to the system. All devices are spread spectrum, 900 MHz, fully supervised devices which use stan- dard ‘AAA’ or ‘AA’ alkaline batteries.
Seven devices are available. They are as follows:
WLS904 Wireless Motion Detector: Adds wireless space pro-
tection to your system
WLS905 Wireless Universal Transmitter: Adds wireless door
or window contacts to your system.
WLS906 Wireless Smoke Detector: Adds smoke detection to
your system.
WLS907 Wireless Slimline Universal Transmitter: A smaller
wireless door or window contact.
WLS908 Wireless Panic Pendant: Adds personal protection to the system. When used, the unit will indicate a
WLS909 Wireless Key : Adds a simple and mobile method of arming and disarming to the system, as well as
WLS910 Wireless Handheld Keypad*: A portable keypad which allows arming and disarming from anywhere on the premises.
PC5400 Printer Module
The PC5400 Printer Module allows the panel to print out all events that occur on the system to any serial printer. The print- out will contain the time, date and the event that occurred.
PC5204 Power Supply Output Module
The PC5204 can provide up to 1 Amp of additional power for modules or devices connected to the control panel. The mod- ule requires a 16.5 volt AC 40 VA transformer and 4 AH bat- tery. In addition, the module provides 4 programmable high current voltage outputs. Each output is individually program- mable. (See 5.11 “PGM Output Options” on page 20.) (See PC5204 Installation Instructions Sheet.)
PC5208 Eight Low Current Output Module
Adds eight low current outputs (50 mA) to the control. Each output is individually programmable. (See 5.11 “PGM Output Options” on page 20.) (See PC5208 Installation Instructions Sheet.)
Escort5580 Module
This Escort5580 module will turn any touch tone phone into a fully functional keypad. The module also includes a
PC5928/PC5936 Audio Interface Modules
The Audio Interface module is a simple way to incorporate paging, intercom, baby
PC5921 Intercom Audio Station
Used in conjunction with the PC5928 Audio Interface Module.
PC5921 EXT Door Box Audio Station
Used in conjunction with the PC5928 Audio Interface Module.
PC5921 EXT/R Door Box Audio Station
Used in conjunction with the PC5928 Audio Interface Module. The Door Box contains a relay so the normal door bell can be used instead of the internal one generated by the PC5928 module.
PC5904 Central Station Talk/Listen Module
Used in conjunction with the PC5928 audio interface module for
Each station has a separate microphone and speaker. Each station must be home run to the interface module using shielded 22 gauge, 4 conductor wire. All stations can be used to sound an alarm follower.
LINKS1000 Cellular Communicator*
The LINKS1000 Cellular Communicator can be used three dif- ferent ways: as the sole communicator for the panel, as a backup for either or both telephone numbers or as a redun- dant backup to the land line communicator where the panel will call both the land line and via the LINKS.
LINKS2X50*
Either the LINKS2150 or LINKS2450 may be used to transmit alarm information over a long range radio network.
Skyroute Transceiver*
The Skyroute transceiver offers a new wireless method of communication for the transmission of events using cellemetry service.
Cabinets
Several different cabinets are available for the PC1555MX modules. They are as follows:
PC5003C Cabinet
Main control cabinet for the PC1555MX main panel. Dimen- sions 288mm x 298mm x 78mm / 11.3” x 11.7” x 3” approxi- mately.
PC5004C Cabinet
Cabinet to house the PC5400 Printer Module. Dimensions 229mm x 178mm x 65mm / 9” x 7” x 2.6” approximately.
Backplates
There are two different backplates available for keypads to locate an Audio Station next to the keypad:
PC55BP1 Backplate
This backplate is to be used when an Audio Station is to be located next to a keypad. Dimensions 208mm x 115mm x 18mm / 8.2” x 4.5” x 0.25” approximately.
PC55BP2 Backplate
This backplate is to be used when an Audio Station is to be located next to a keypad. In addition the backplate will allow you to mount a PC5208 Eight Low Current Output Module. Dimensions 208mm x 115mm x 18mm / 8.2” x 4.5” x 0.7” approximately.
1.3Out of the Box
Please verify that the following components are included in your system:
•one PC5003C main control cabinet
•one PC1555MX main control circuit board
•one Power keypad with zone input
•one Installation Manual with programming worksheets
•one Instruction Manual for the end user
•one hardware pack consisting of:
-one mylar cabinet label
-four plastic circuit board standoffs
-sixteen 5600Ω (5.6K) resistors
-one 2200Ω (2.2K) resistor
-one 1000Ω (1K) resistor
-ground connection assembly
-one cabinet door plug
WWW.DIYALARMFORUM.COM
2 | *WLS910, LINKS1000, LINKS2X50, and Skyroute have not been investigated by UL. |