Sony KD-34XBR970 manual Satellite Receiver

Satellite Receiver To connect a satellite receiver

Using

S VIDEO jacks? See page 7.

1Connect the satellite antenna cable to the satellite receiver’s satellite input jack.

2Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks.

3Connect a CATV cable from your cable or antenna to the TV’s CABLE jack.

4Run Auto Program, as described in “Setting Up the Channel List” on page 20.

TV

CATV cable/antenna

Setup

DIGITAL

AUDIO

OUT

PCM/

DOLBY DIGITAL

A/V cable

Notes on Using This Connection

Satellite receiver

Satellite antenna cable

Cables are often

color-coded to connectors.

Connect red to red, white to white, etc.

SETUP

SETUP

To Do This ...	Do This ...
Watch the satellite receiver	Press TV/VIDEO repeatedly to select the satellite receiver input
	(VIDEO 1 in the illustration).
Set up the TV remote control to operate the	If you have a non-Sony satellite receiver, you must program
satellite receiver	the remote control. See “Programming the Remote Control”
	on pages 24-25.
Activate the TV remote control to operate	Press SAT/CABLE FUNCTION.
the satellite receiver
Control satellite receiver functions with the	See “Operating a Satellite Receiver” on page 26.
TV remote control
Label video inputs to easily identify	See the instructions for setting up Video Labels on page 45.
equipment connected to the TV

SETUP

SETUP

11