Sony KD-34XBR970 manual Programming the Remote Control

Remote Control

Programming the Remote Control

If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the

6 TV’s remote control, use the following procedure to program the 3 remote control.

✍ The equipment must have infrared (IR) remote capability in order to be used with the remote control.

1		Turn to the list of “Manufacturer’s Codes” on page 25, and find
		the three-digit code number for the manufacturer of your
	4	equipment. (If more than one code number is listed, use the
		number listed first.)
2		Press CODE SET.
5 3		Press the VCR/DVD FUNCTION or SAT/CABLE FUNCTION button.
4		Using the 0-9buttons, enter the three-digit manufacturer’s code
		number.

5Press the ENTER button.

✍You must do step 5 within 10 seconds of step 4, or you must redo

2 RM-YD007 steps 2 through 5.

6 To check if the code number works, aim the TV’s remote control at the equipment and press the POWER button that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.

Notes	❑ If more than one code number is listed, try entering them one by
	one until you come to the correct code for your equipment.
	❑ If you enter a new code number, the code number you previously
	entered at that setting is erased.
	❑ In some cases, you may not be able to operate your equipment
	with the supplied remote control. In such cases, use the
	equipment’s own remote control.
	❑ Whenever you remove the batteries to replace them, the code
	numbers may revert to the factory setting and must be
	reprogrammed.

24