Setup

SETUP

Satellite Receiver and VCR

Using

S VIDEO jacks?

See page 7.

To connect a satellite receiver and VCR

1Connect the CATV cable or Antenna to the single (input) jack of the splitter.

2Use a coaxial cable to connect one of the splitter’s two output jacks to the TV’s VHF/UHF jack.

3Use a coaxial cable to connect the splitter’s other output jack to the satellite receiver’s VHF/UHF input jack.

4Connect the satellite antenna cable to the satellite receiver’s satellite input jack.

5Use a coaxial cable to connect the satellite receiver’s VHF/UHF output jack to the VCR’s VHF/UHF input jack.

6Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks.

7Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s A/V input jacks.

8Run Auto Program, as described in “Setting Up the Channel List” on page 20.

TV

Splitter (not supplied)

Coaxial cable

DIGITAL

AUDIO

OUT

PCM/

DOLBY DIGITAL

A/V cable

CATV cable/antenna

Satellite antenna cable

Coaxial cable

Satellite receiver

Cables are often

color-coded to connectors. Connect red to red, white to white, etc.

Coaxial

cable

VCR

A/V cable 7

12

Page 19
Image 19
Sony KD-34XBR970 manual Satellite Receiver and VCR, To connect a satellite receiver and VCR