14
SETUP SETUP SETUPSETUP SetupSETUP
KD-34XBR970
2-671-222-21(1)

DVD Player with

Component Video

Connectors

For best results, use this connection if your DVD player has
component video (YPBPR) jacks.
To connect a DVD player with component video connectors
1Use three separate component video cables to connect the DVD
player’s YPBPR jacks to the YPBPR jacks (VIDEO 4) on the TV.

2

Use an audio cable to connect the DVD player’s audio output
jacks to the TV’s VIDEO 4 audio input jacks.
Notes on Using This Connection
The YPBPR jacks on your DVD player are sometimes labeled Y, CB
and CR, or Y, B-Y and R-Y. If so, connect the cables to like colors.
To Do This ... Do This ...
Watch the DVD player Press TV/VIDEO repeatedly to select the DVD input (VIDEO 4 in the
illustration).
Set up the TV remote control
to operate the DVD player
If you have a non-Sony DVD player, you must program the remote control.
See “Programming the Remote Control” on pages 24-25.
Activate the TV remote
control to operate the DVD
player
Press VCR/DVD FUNCTION.
Control DVD functions with
the TV remote control
See “Operating a DVD Player” on page 27.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page45.
DIGITAL
AUDIO
OUT
Component video cables
Audio cable
TV
DVD player
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
You cannot record the signal from any equipment connected into the YPBPR
jacks.