8
SETUP SETUP SETUPSETUP SetupSETUP
KD-34XBR970
2-671-222-21(1)

VCR and Cable or

Antenna

For best results, use this connection if:
Your cable company does not require you to use a cable box.
To connect the VCR and Cable or Antenna
1Connect the CATV cable or Antenna to the VCR’s input jack.
2Use a coaxial cable to connect the VCR’s output jack to the TV’s

VHF/UHF jack.

3Use an A/V cable to connect the VCR’s A/V output jacks to the

TV’s A/V input jacks.

4Run Auto Program, as described in “Setting Up the Channel List”

on page20.

Notes on Using This Connection
Using
S VIDEO jacks?
See page7.
To Do This ... Do This ...
Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Watch cable channels Press TV/VIDEO repeatedly to select the cable input.
Set up the TV remote control
to operate the VCR
If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages24-25.
Activate the TV remote
control to operate the VCR
Press VCR/DVD FUNCTION.
Control VCR functions with
the TV remote control
See “Operating a VCR” on page 26.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page45.
DIGITAL
AUDIO
OUT
DIGITAL
AUDIO
OUT
PCM/
PCM/
DOLBY DIGIT
DOLBY DIGIT
AL
AL
CATV cable/antenna
Coaxial cable
A/V cable
TV
VCR
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.