To | Do this |
| |
|
|
| |
Set a programme to be displayed | 1 | Press F/f/G/g to select the future programme you want to | |
automatically on the screen when it starts |
| display. |
|
– Reminder | 2 | Press . |
|
| 3 | Press F/f to select “Reminder”. | |
| 4 | Press | to automatically display the selected programme |
|
| when the programme starts. | |
A c symbol appears by that programme’s information.
Note
If you switch the TV to standby mode, it will automatically turn itself on when the programme is about to start.
Set the time and date of a programme you want to record – Manual timer REC
1Press 
.
2Press F/f to select “Manual timer REC”, then press 
.
3Press F/f to select the date, then press g.
4Set the start and stop time in the same way as in step 3.
5Press F/f to select the programme, then press 
to set the TV and your VCR timers.
A 
symbol appears by that programme’s information. The 
indicator on the TV (front) lights up.
Notes
•You can set VCR timer recording on the TV only for Smartlink compatible VCRs. If your VCR is not Smartlink compatible, a message will be displayed to remind you to set your VCR timer.
•Once a recording has begun, you can switch the TV to standby mode, but do not switch off the TV completely or the recording may be cancelled.
•If an age restriction for programmes has been selected, a message asking for pin code will appear on the screen. For more details refer to “Parental Lock” on page 29.
Cancel a recording/reminder – Timer list | 1 Press . |
2Press F/f to select “Timer list”.
3Press F/f to select the programme you want to cancel, then press 
.
A display appears to confirm that you want to cancel the programme.
4Press g to select “Yes”, then press 
to confirm.
Tip
You can also display the Digital Electronic Programme Guide (EPG) by selecting “Digital EPG” in the “MENU”.