3 Press F/f to select the language displayed on the menu screens, then press .

Auto Start Up

Language

Country

Select:Confirm:

4 Press F/f to select the country/region in which you will operate the TV, then press .

Auto Start Up

Language

Country

Select: Confirm:

If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region.

The message confirming the TV start auto-tuning appears on the screen, then go to “6: Auto-tuning the TV”.

6: Auto-tuning the TV

After selecting the language and country/region, a message confirming the TV start auto-tuning appears on the screen.

The TV will now search for and store all available TV channels.

1

3

1 Press .

 

 

 

 

 

 

Back:

Start:

Cancel: MENU

 

 

 

The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, please be patient and do not press any buttons on the TV or remote.

If a message appears for you to confirm the aerial connections

No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again.

2 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 25).

If you do not wish to change the order in which the analogue channels are stored on the TV, go to step 3.

3 Press MENU to exit.

The TV has now tuned in all the available channels.

6 GB