Sony KDF-50E2000 Screen, AV2 Output, RGB Center, PC Adjustment, 23 GB

Features menu

Features
Screen
AV2 Output	TV
RGB Center	0
PC Adjustment
Timer

Back: Select: Enter: Exit: MENU

You can select the options listed below on the Features menu. To select options in “Settings”, see “Navigating through menus” (page 19).

Screen	Changes the screen format.
	•	“Auto Format”: Automatically changes the screen format according to the
		broadcast signal.
	•	“Screen Format”: For details about the screen format, see page 14
	•	“Vertical Size”: Adjusts the vertical size of the picture when the screen format is
		set to Smart.

Tips

• Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the

format of the screen by pressing repeatedly.

• “Auto Format” is available for PAL and SECAM signals only.

AV2 Output	Sets a signal to be output through the socket labelled			/	2 on the rear of the
	TV. If you connect a VCR to the	/	2 socket, you can then record from the

equipment connected to other sockets of the TV.

•“TV”: Outputs a broadcast.

•“Auto”: Outputs whatever is being viewed on the screen.

RGB Center	Adjusts the horizontal picture position so that the picture is in the middle of the
	screen.
	Tip
	This option is only available if an RGB source has been connected to the Scarts connectors
	1/	1 or	2/	2 on the rear of the TV.
PC Adjustment	Customizes the TV screen as a PC monitor.
	Tip

This option is only available if you are in PC Mode.

•“Phase”: Adjust the screen when a part of a displayed text or image is not clear.

•“Pitch”: Enlarges or shrinkes the screen size horizontally.

•“H Center”: Moves the screen to the left or to the right.

•“V Lines”: Corrects the picture lines while viewing an RGB input signal from the

PC connector.

•“Power saving”: Turns to standby mode if no PC signal is received.

•“Reset”: Resets to the factory settings.

Functions MENU Using

Continued

23 GB