Problem

Cause/Remedy

 

 

Irregular picture when viewing

• Check PC input socket connection.

a signal from PC

• Connect to PC input socket instead of HDMI IN 6 socket.

 

• If the connection is only available through HDMI socket, change the screen

 

resolution to 720p and adjust horizontal and vertical screen size in the

 

display properties settings of PC.

Sound

Problem

Cause/Remedy

 

 

No sound, but good picture

• Press 2 +/– or % (Mute).

 

•

Check that “TV Speakers” is set to “On” in the “Sound Adjustment” menu

 

 

(page 22).

 

 

 

Noisy sound

•

See the “Picture noise” causes/remedies on page 38.

 

 

 

Channels

Problem

Cause/Remedy

 

 

The desired channel cannot be

• Switch between digital and analogue mode and select the desired digital/

selected

analogue channel.

 

 

Some channels are blank

• Scrambled/Subscription only channel. Subscribe to the Pay Per View

 

service.

 

• Channel is used only for data (no picture or sound).

 

• Contact the broadcaster for transmission details.

 

 

Digital channel is not displayed

• Check that the aerial is plugged directly into the TV (not through other

 

equipment).

 

• Contact a local installer to find out if digital transmissions are provided in

 

your area.

 

• Upgrade to a higher gain aerial.

 

 

General

Problem

Cause/Remedy

 

 

 

 

 

 

The TV turns off automatically

• Check if the “Sleep Timer” is activated, or confirm the setting of “Off Time”

(the TV enters standby mode)

(page 24).

 

 

 

 

 

• If no signal is received and no operation is performed in the TV mode for

 

 

 

 

 

10 minutes, the TV automatically switches to standby mode.

 

 

 

 

 

 

The TV turns on automatically

• Check if the “On Time” is activated (page 24).

 

 

 

 

 

 

Some input sources cannot be

• Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input

selected

source (page 25).

 

 

 

 

 

 

The remote does not function

• Replace the batteries.

 

 

 

 

 

 

The lamp indicator

 

 

 

on front

• Turn the TV off. Turn the TV on again, if the lamp indicator is still lit then

 

 

of the TV set is lit.

replace the internal lamp. For details refer to page 33.

 

 

 

 

 

 

Information Addditonal

39 GB