Viewing Pictures from Connected Equipment

Turn on the connected equipment, and perform one of the following operations.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment. The picture from the connected equipment appears on the screen.

For an auto-tuned VCR

In analogue mode, press PROG +/– or the number buttons, to select the video channel.

For a USB device

See page 24.

For a network device, see page 31.

For other connected equipment

1Press HOME.

2Press g to select “External Inputs”.

3Press F/f to select the desired input source, then press .

Switches to the video of equipment connected to the AV3 inputs.

Switches to the video of equipment connected to Component 1 or 2 inputs.

Switches to the video of equipment connected to AV1 or AV2 inputs.

Switches to the video of equipment connected to HDMI 1, HDMI 2, HDMI 3, or HDMI 4 input.

Switches to the video of equipment connected to DMPORT input.

Switches to the video of the

PC connected to PC input.

~

•Depending on the “Skip AV Inputs” setting (page 43), some input sources may not appear in the list. If you have set an input source to “Skip”, that input source does not appear regardless of whether the equipment is connected. If you have set an input source to “Auto”, that input source does not appear when the equipment is not connected to the TV.

Additional operations

To

Do this

Return to normal TV

Press DIGITAL or

mode

ANALOG.

 

 

Change the volume of

Press 2 +/–.

the connected audio

 

system that is

 

compatible with

 

control for HDMI

 

 

 

Mute the sound of the

Press %.

connected audio

Press again to restore

system that is

the sound.

compatible with

 

control for HDMI

 

 

 

To view two pictures simultaneously

– PAP (Picture and Picture)

You can view two pictures (external input and TV programme) on the screen simultaneously. Connect an optional equipment (page 21), and make sure that images from the equipment appear on the screen (page 23).

~

•This function is not available for a PC input or DIGITAL MEDIA PORT input.

•You cannot change the size of the pictures.

1Press OPTIONS.

2Press F/f to select “PAP”, then press .

The picture from the connected equipment is displayed on the left, and the TV programme is displayed on the right.

3Press the number buttons or PROG +/– to select the TV channel.

To return to single picture mode

Press RETURN.

z

•The highlighted picture is audible. You can switch the audible picture by pressing G/g.

Equipment Optional Using

(Continued) 23 GB