Condition

Explanation/Solution

No picture from the connected• Turn the connected equipment on.
equipment appears on the• Check the cable connection.

screen.

• Press

to display the list of inputs, then select the desired input.

•Correctly insert the memory card or other storage device in the digital still camera.

•Use a digital still camera memory card or other storage device that has been formatted according to the instruction manual supplied with the digital still camera.

•Operations are not guaranteed for all USB devices. Also, operations differ depending on the features of the USB device and the video being played.

You cannot select the

• Check the cable connection.

connected equipment on the

• Set the server to be displayed on the Home Menu (page 33).

Home Menu or you cannot

 

switch the input.

 

Sound
The picture is good, but there is no sound.
•Press 2 +/– or % (Mute).•Check if the “Speaker” is set to “TV Speaker” (page 42).

•When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

 

The sound from the external• Adjust the timing of audio being output using the functions of the

 

audio equipment such as anexternal audio equipment. If you sense that audio is still out of sync with

 

AV amplifier connected to thethe video, set “DRC Mode” to “Off” (page 37).

 

TV may be out of sync with

 

 

the video.

 

 

 

 

 

There is a significant• Adjust “Volume Offset” setting in the “Sound” menu (page 38).

 

difference in the output

 

 

volume level between

 

 

DIGITAL MEDIA PORT

 

 

input and TV or other

 

 

equipment input.

 

 

 

 

Channels

 

 

 

 

 

You cannot select your desired• Switch between digital and analogue mode, and select the desired

 

channel.digital/analogue channel.

 

 

 

 

Some channels are blank.• The channel is for scrambled/subscription service only. Subscribe to a

 

 

pay TV service.

 

 

• The channel is used only for data (no picture or sound).

 

 

• Contact the broadcaster for transmission details.

 

 

 

 

You cannot view digital• Contact a local installer to find out if digital transmissions are provided

 

channels.

in your area.

 

 

• Upgrade to a higher gain aerial.

 

 

 

Home Network

 

 

 

 

 

Connection diagnostic resultsCheck Connections

 

indicate a failure.• Use a straight cable for the LAN cable.

 

 

• Check if the cable is connected firmly.

 

 

• Check the connection between the TV and the broadband router.

 

 

Check Settings

 

 

• Change the IP address for the DNS server (see “Checking the Network

 

 

Connection” on page 33) while referring to the following.

 

 

– Contact your Internet service provider.

 

 

– Specify the IP address of the router if you do not know the DNS of

 

 

your Internet service provider.

 

 

 

54 GB