Sony 4-108-535-13(1), KDL-40X4500, KDL-46X4500, KDL-55X4500 (Continued) 45 GB, B/G:, D/K:, Label, Preset, RETURN, RETURN, PROG +/–, Programme, System/Channel, Programme Labels, Manual Programme

Programme Labels Assigns a channel name of your choice, up to five letters or numbers. The name appears briefly on the screen when you select the channel. (Names for channels are usually taken automatically from Analogue Text (if available).)

1Press F/f to select the channel you want to name, then press .

2Press F/f to select the desired letter or number (“_” for a blank space), then press g.

If you enter a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct character.

3Repeat step 2 until you complete the name.

4Press to exit the labeling procedure.

Manual Programme To preset a channel, press PROG +/– to select the programme number, before

Presetselecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You cannot select a programme number that is set to “Skip” (page 46).

Programme/	Allows you to preset programme channels manually.
System/Channel	1 Press F/f to select “Programme”, then press .

2Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press RETURN.

3Press F/f to select “System”, then press .

4Press F/f to select one of the following TV broadcast systems, then press RETURN.

B/G: For western European countries/areas

I:For the United Kingdom

D/K: For eastern European countries/areas

L:For France

5Press F/f to select “Channel”, then press .

6Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.

~

•“S” is not available when “United Kingdom” is selected for “Country” (page 6).

7Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. The search stops when a channel is found. To continue searching, press F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want to tune, or the channel number of your VCR.

8Press to jump to “Confirm”, then press .

Your changes have been saved.

Repeat the above procedure to preset other channels manually.

Label	Assigns a name of your choice, up to five letters or numbers,
	to the selected channel. This name appears briefly on the
	screen when you select the channel.
	To input characters, follow steps 2 to 4 in “Programme
	Labels” (page 45).

Functions Menu Using

(Continued) 45 GB