System Update | Enables the TV to automatically receive free software | |
| updates through your existing aerial/cable (when issued). We | |
| recommend that you leave the setting to “On” at all times. | |
|
| |
System | Displays the current software version and the signal level. | |
Information |
|
|
|
| |
Time Zone | Allows you to manually select the time zone you are in, if it is | |
| not the same as the default time zone setting for your country/ | |
| area. |
|
|
| |
Auto DST | Sets whether or not to automatically switch between summer | |
| time and winter time. | |
|
|
|
| Off | Displays the time according to the time |
|
| difference set in “Time Zone”. |
|
|
|
| On | Automatically switches between summer |
|
| time and winter time according to the |
|
| calendar. |
CA Module
Network Settings
Network | IP Address | Manual | Allows you to set the network settings |
| Settings |
| according to your network environment. |
|
|
|
|
|
| DHCP (DNS | Automatically acquires the network |
|
| manual) | settings except for DNS server settings. |
|
|
| You can manually set the DNS settings. |
|
|
|
|
|
| DHCP (DNS | Automatically acquires the network |
|
| automatic) | settings through the Dynamic Host |
|
|
| Configuration Protocol server function of |
|
|
| the router or Internet service provider. |
|
|
| |
| Test | Diagnoses whether the network is correctly connected. | |
|
|
| |
| IP Address/ | You need to configure each item when “Manual” is selected | |
| Subnet Mask/ | in “IP Address Settings”. | |
| Default Gateway/ | When “DHCP (DNS manual)” is selected, be sure to enter | |
| Primary DNS/ | “Primary DNS” and “Secondary DNS” server addresses | |
| Secondary DNS | manually. |
|
|
|
| |
| MAC Address | Displays the MAC address, which is a fixed, globally unique | |
|
| identifier of the network device. | |
|
| ||
Server Display | Displays the connected server list and allows you to select the server you want to | ||
Settings | display on the Home Menu. |
| |
|
| ||
Server Diagnostics | Diagnoses whether the TV can connect to each server on the home network. | ||
|
| ||
Renderer Function | Enables playback of photos or music on the TV through other control devices on | ||
| the network, such as a digital still camera or mobile phone. | ||
|
| ||
Renderer Access | Allows you to specify the accessible controller to the TV. When this setting is set to | ||
Control | “On”, you can playback photos or music on the TV using the controller. | ||
|
|
| |
Renderer | Automatic | Allows you to select whether to permit access to the TV | |
| Access | automatically when a network device accesses the TV for the | |
| Permission | first time. |
|
|
|
| |
| Renderer Name | Allows you to set the name of the TV to be shown on the | |
|
| controller. |
|
|
|
|
|