~

•If the photograph is selected from a USB device, it must remain connected to the TV.

•If “Sleep Timer” is activated, the TV automatically will switch into standby mode.

To display a photograph with the location on the map

When using a digital still camera with GPS function, it is possible to display a photograph with a map of the location where the photograph was taken using a function of GPS for recording longitude and latitude. Because map information is downloaded from the Internet online map service, the network connection must be required and the TV has to be connected to the network (page 31).

1Select a photograph (page 24).2Press the green/red buttons to zoom in/out on the map.

To change the display position of the map on the TV screen, press the blue button repeatedly.

~

•Because the Internet online map service is provided by a third party, service may be changed or terminated without prior notification to the user.

•The position indicated on the map may differ depending on the digital still camera.

•Only a large-scale map that cannot be zoomed in or out is displayed if the TV is not connected to the Internet or the Internet online map service is terminated.

z

•A map can be displayed in the case of photograph’s Exif data includes a date information, and the associated longitude and latitude information (“Log files”) has been recorded using a Sony GPS unit. Follow the procedure described below.

1Connect the GPS unit to the USB port.

2Press HOME.

3Press G/g to select “Photo”.4Press F/f to select the GPS unit, then press .5Select “Load GPS log files”, then press .
6Select the following items using F/f, then set them using G/g.–Time Zone–DST7Select “OK”, then press . The GPS log files are loaded.

8Disconnect the GPS unit and connect the device on which the photograph is stored.

9Select a photograph (page 24).10Press the green/red buttons to zoom in/out on the map.

26 GB