AFT

Allows you to fine-tune the selected channel manually if you

 

feel that a slight tuning adjustment may improve picture

 

quality.

 

You can adjust the fine tuning over a range of –15 to +15.

 

When “On” is selected, fine tuning adjustments are made

 

automatically.

 

 

Audio Filter

Improves the sound of individual channels when distortion

 

occurs in mono broadcasts. Sometimes a non-standard

 

broadcast signal can cause sound distortion or intermittent

 

sound muting in mono programmes.

 

If you do not experience any sound distortion, we recommend

 

that you leave this option to “Off” (factory setting).

~

•You cannot receive stereo or dual sound when “Low” or “High” is selected.

 

Skip

Skips unused analogue channels when you press PROG +/–

 

 

to select channels. To select channels you have programmed

 

 

to skip, use the corresponding number buttons.

 

 

 

 

 

 

 

Decoder

Allows you to view and record the scrambled channel when

 

 

using a decoder connected directly to scart connector

/

 

 

 

 

AV1, or

/

 

AV2 via a VCR.

 

 

 

 

 

 

 

 

 

~

 

 

 

 

 

 

• This option is not available when “United Kingdom” is

 

 

 

 

 

selected for “Country” (page 6).

 

 

 

 

 

 

 

 

LNA

Improves the picture quality of the channel (noisy picture)

 

 

when the broadcast signal is very weak.

 

 

 

If you cannot see any improvement in the picture quality even

 

 

if you set to “On”, set this option to “Off” (factory setting).

 

 

 

 

 

 

 

Confirm

Saves changes you have made to the “Manual Programme

 

 

Preset” settings.

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital Set-up

Digital Auto Tuning Tunes in the available digital channels.

You can retune the TV after moving house, or to search for newly launched channels.

Programme Sorting Allows you to remove or change the order of digital channels stored in the TV.

1Press F/f to select the channel you want to remove or move to a new position.

You can also select a channel by pressing the number buttons to enter its three-digit channel number.

2Remove or change the order of the digital channels as follows:

To remove a digital channel

Press . After a confirmation message appears, press G to select “Yes”, then press .

To change the order of the digital channels

Press g, then press F/f to select the new position for the channel and press G.

3Press RETURN.

46 GB