You can select the options listed below on the Screen Control menu. To select options, see “Navigating through menus” (page 21).
Auto Format
Automatically changes the screen format according to the broadcast signal.
1 Press OK to select “Auto Format”.
2 Press M/m to select “On”, then press OK.
To keep your setting, select “Off”.
Tips
•Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of
the screen by pressing 
repeatedly.
•“Auto Format” is available for PAL and SECAM signals only.
Screen Format
For details about the screen format, see page 17.
1 Press OK to select “Screen Format”.
2 Press M/m to select “Smart”, “4:3”, “14:9”, “Zoom” or “Wide” (see page 17 for details), then press OK.
Screen Shift
Adjusts the position of the picture for each screen format.
1 Press OK to select “Screen Shift”.
2 Press M/m to select one of the following, then press OK.
V Shift: Adjusts the vertical picture position.
H Shift: Adjusts the horizontal picture position.
Reset: Resets to the factory settings. Instead of step 3, press M/m to select “OK”, then press OK.
3 Press M/m (for vertical picture position) or </, (for horizontal picture position), then press OK.
Tip
When “Screen Format” is set to “4:3” or “Wide”, “V Shift” cannot be adjusted.
Menu the Using