Problem |
| Cause/Remedy |
|
|
|
| |||
Picture noise when viewing a | • Select “Manual Programme Preset” in the “Set Up” menu and adjust “AFT” | ||||||||
TV channel |
|
| (Automatic Fine Tuning) to obtain better picture reception (page 34). | ||||||
|
|
|
| • Select “Noise Reduction” in the “Picture Adjustment” menu to reduce the | |||||
|
|
|
|
| noise in the picture (page 24). |
|
|
|
|
|
|
|
|
|
|
| |||
Stripe noise during playback/ |
| • Video head interference. Keep your VCR away from the TV. | |||||||
recording of a VCR |
| • Leave a space of 30 cm between your VCR and the TV to avoid noise. | |||||||
|
|
|
| • | Avoid installing your VCR in front of the TV or beside the TV. | ||||
|
|
|
|
|
| ||||
Some tiny black points and/or | • The picture of a display unit is composed of pixels. Tiny black points and/or | ||||||||
bright points on the screen |
|
| bright points (pixels) on the screen do not indicate a malfunction. | ||||||
|
|
|
|
|
|
| |||
No colour on programmes |
| • Select “Reset” in the “Picture Adjustment” menu to return to the factory | |||||||
|
|
|
|
| settings (page 24). |
|
|
|
|
|
|
|
|
|
|
|
|
| |
No colour or irregular colour |
| • | Check the connection of the Y, PB/CB, PR/CR jacks of |
| 3. | ||||
|
| ||||||||
when viewing a signal from the | • | Make sure that the Y, PB/CB, PR/CR jacks of |
| 3 are firmly seated in their | |||||
| |||||||||
Y, PB/CB, PR/CR jacks of |
|
| 3 |
| respective sockets. |
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
Sound
Problem | Cause/Remedy | |
|
|
|
No sound, but good picture | • | Press 2 +/- or % (Mute). |
| • Check that “Speaker” is set to “On” in the “Features” menu (page 28). | |
|
| |
Noisy sound | • See the “Picture (dotted lines or stripes) noise” causes/remedies on page 44. | |
|
|
|
Audio distortion | • | See “Audio Filter” on page 35. |
|
|
|
Channels
Problem | Cause/Remedy |
The desired channel cannot be | • Switch between digital and analogue mode and select the desired digital/ |
selected | analogue channel. |
Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View service.
•Channel is used only for data (no picture or sound).
•Contact the broadcaster for transmission details.
Digital channel is not displayed • Check that the aerial is plugged directly into the TV (not through other equipment).
•Contact a local installer to find out if digital transmissions are provided in your area.
•Upgrade to a higher gain aerial.
Information Additional
Continued