You can select the options listed below on the Timer menu. To select options, see “Navigating through menus” (page 21).
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby mode.
1 Press OK to select “Sleep Timer”.
2 Press M/m to select the desired time period (“30min”/“60min”/“90min”/ “120min”), then press OK.
The 
(Timer) indicator on the TV (front) lights up in orange.
Tips
•If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
•“Sleep timer will end soon. Power will be turned off.” appears on the screen one minute before the TV switches to standby mode.
•If you press 
/
, the remaining time in minutes before the TV switches to standby mode is displayed on the screen.
Auto Shutoff
Sets the TV to switch to standby mode automatically when you select the input source and there is no input signal from connected equipment.
In TV mode, this Auto Shutoff function is always set to “On”.
1
2
Press OK to select “Auto Shutoff”.
Press M/m to select “On”, then press OK.